MINERCO

mine process

Gravel Pump Selection Starts with What Reaches the Inlet

Gravel Pump Selection Starts with What Reaches the Inlet

  • Tuesday, 03 November 2026
  • 0
  • 53
  • 0

 

“Mostly sand, with a few stones.”

For someone specifying a gravel pump, those last four words deserve attention. The sand may pass easily, while the occasional larger stone determines whether the proposed pump is suitable.

Flow and head remain essential, but they do not describe the solids passage. Neither does the discharge diameter. The material must travel through the impeller and casing, so the internal openings need checking against what actually enters the suction.

Screening Changes the Pump Requirement

If the feed passes through a screen, include the screen opening in the enquiry. Also mention whether damaged screens or bypass arrangements can allow larger material through. An average particle size alone can leave this out.

Minerco’s G/GH gravel pump can be reviewed for sand, gravel and coarse abrasive slurry duties. The proposed model needs to match the solids as well as the required flow, head and suction conditions.

Before approving the quotation, ask for confirmation of the model’s solids passage. Describe the largest expected particles and how frequently they occur. That gives the supplier something specific to assess, beyond “suitable for sand and gravel.”

0users like this.

Comment Closed
Blog Tag
RSS

Get in touch

Refresh Code